Home / Services / Faucet Repair & Installation
DRIPS AND WEAK FLOW
Faucet Repair & Installation in Gilbert, AZ
A faucet that drips, sputters, or barely flows. In Gilbert that is usually hard water at work on the cartridge and aerator. We repair it or install a fixture that lasts.
- Licensed and insured Arizona plumbers
- Straight to a plumber, no forms
- Emergencies answered 24 hours
A dripping or weak faucet is a small repair with a specific local cause. Gilbert's hard water leaves mineral deposits on the exact moving parts a faucet depends on: the cartridge that controls flow and temperature, and the aerator screen at the tip. Over time those deposits cause drips, temperature drift, and the trickle that makes people think the water pressure has dropped when the fault is a clogged aerator.
We fix the faucet you have when it is worth fixing, and install a new one when it is not. Builder-grade faucets from the 1990s and 2000s are common across Gilbert, and many are now at the point where a quality replacement outlasts another round of parts.
What hard water does to a Gilbert faucet
| What you notice | Usual cause | Fix |
|---|---|---|
| Weak flow from one faucet | Scale-clogged aerator | Clean or replace aerator |
| Persistent drip | Worn or scaled cartridge | New cartridge or faucet |
| Temperature drifts | Failing mixing cartridge | Cartridge replacement |
| Handle stiff or loose | Mineral buildup in valve | Service or replace valve |
The fastest free fix in a hard-water town
Before assuming the whole house has low pressure, unscrew the aerator at the tip of the slow faucet and look at the screen. In Gilbert it is often packed with white or grey mineral flakes. Rinsing or replacing that one part restores the flow on many calls, and it is worth checking before anything bigger.
Repair or replace
Replacing a cartridge or aerator is quick and cheap and is the right call for a good-quality faucet. Once a builder-grade fixture is dripping from the base, has a corroded finish, or needs its second cartridge, replacement usually costs little more than the repair and gives you a fixture with better internals that stand up to the water. We will tell you which side of that line yours falls on rather than defaulting to the more expensive answer.
Getting a faucet install right the first time
What a proper install includes:
- New supply lines and shutoff valves if the old ones are corroded
- Checking the shutoffs actually close, common failure on hard water
- Proper sealing at the deck to prevent slow leaks into the cabinet
- Testing hot and cold sides for cross-flow and temperature
- Clearing the new aerator of install debris before you use it
Need a plumber out to Gilbert today?
Skip the rest of this page and call. We answer 24 hours for anything urgent.
Call (480) 806-2944Matching the faucet to how the sink is actually used
A kitchen faucet that handles constant use, filling pots and rinsing dishes, wears differently than a guest-bathroom faucet touched twice a day, and the right replacement reflects that. For a heavily used kitchen sink, we lean toward faucets with commercial-grade ceramic disc cartridges that hold up to both frequent cycling and Gilbert's mineral content. For lower-use fixtures, a mid-range faucet with good internals is plenty, and there is no reason to pay for kitchen-grade durability on a powder room sink nobody uses daily.
Gilbert questions about faucet repair & installation
Why does only one faucet have weak pressure?
If the low flow is at a single faucet, it is almost never house pressure. It is the aerator at that faucet clogged with mineral scale, or the cartridge. Whole-house low pressure would affect every fixture at once. Cleaning that one aerator often fixes it.
My faucet drips right after a new cartridge. Why?
Usually because hard-water scale has pitted the valve seat the cartridge sits against, so a new cartridge cannot seal on a rough surface. At that point the faucet body itself is worn, and a replacement fixture is the lasting fix rather than another cartridge.
Are expensive faucets worth it here?
The internals matter more than the brand name. A faucet with a solid ceramic-disc cartridge handles Gilbert's minerals better than the cheapest builder-grade units, which is why those are the ones we most often replace. You do not need the most expensive faucet, just one with good valve internals.
Can you install a faucet I already bought?
Yes, that is common. We will check it fits your sink's hole configuration and that your existing shutoffs still work, since
on hard water often need replacing at the same time.
Related fixture and hard-water work
Faucet work overlaps with the other fixture and hard-water services. Failing shutoffs tie into toilet repair, persistent hard-water damage across every fixture is the argument for a water softener, and a kitchen faucet job often pairs with garbage disposal service under the same sink. If cleaning the aerator does not restore flow, leak detection rules out a supply problem. We handle fixtures across Gilbert and Tempe Junction.
Faucet dripping or barely flowing?
It is usually a quick hard-water fix. Call and we will sort the repair-or-replace question honestly.